Ashford Formula

Woolworths Distribution Centre, 45,000m2

Concord Industrial Coatings Pty. Ltd. are the preferred Applicators in Queensland & N.S.W.

Ashford Formula is the original Concrete Densifier, Sealer & Hardener. The Formula that built the Concrete Densification Industry. Ashford Formula Cures, Seals, Hardens & Dust Proofs the treated Concrete, Permanently & will protect the concrete slabs during the building process. An Ashford Formula treated floor never needs re-coating, will not Scratch, Peel, Tear, Blister, De-laminate or Wear.

“Ashford Formula” 5 Point System

Step 1. Application

The “Ashford Formula” 5 POINT System Flood the area to be treated, broom to break the surface tension, wait until the Ashford begins to “gel” (aprox. 15-30 minutes) lightly spray with water, broom again to re-activate the Ashford and squeegee off the remaining residue. Lightly respray the treated area again with water and rinse to remove any remaining residue, highly burnished concrete may require a second rinse.

This application, Cures, Seals, Hardens&Dust Proofs the treated Concrete, Permanently & helps protect the concrete slabs during the building process, an Ashford Formula treated floor never needs re-coating, will not Scratch, Peel, Tear, Blister, De-laminate or Wear.

Caution: Good house keeping must be carried out in the initial stages of construction, care must be taken to wipe up oil spills and other contaminates when they occur.

Step 2. Clean

Prior to Hand over, at the end of the Project, the initial Ashford treated floor receives a Mechanical Sweep & Scrub to remove dirt and other contaminants from after trades ready for the next step.

Step 3. Spiff Coat

Apply a "Spiff" coat of Ashford Formula to any areas that have been dulled during the construction process by light spraying to small areas, or preferably by a ride on mechanical scrubber, working the Ashford Formula into the concrete slab and retrieving any excess during the final clean.  This process will give an even and consistent sheen over all areas, providing the concrete slabs have been burnished consistantly.

Step 4. Buffing

Your Certified Ashford Formula Applicator mechanically Buffs the treated floor so the Builder can hand his Client a typical Ashford Formula floor.

Step 5. Warranty

The Certified Ashford Formula Applicator will send all Q.A Sheets to Ashford Formula (Qld) Pty. Ltd and a Manufactures Twenty (20) Year Warranty is issued.

20 year warranty

Because Ashford Formula has a successful track record going back to the late 1940’s, Curecrete has the confidence to back up their product, nobody else has floors old enough to demonstrate that they can safely offer s uch a long - term warranty, but with floors treated over 50 years ago with Ashford Formula still look brand new, despite all the traffic & abuse.